VMC-1066HD Vertical Machining Center
Product Overview
Product Features
- Full-Tooth Spindle Design for Superior Machining Performance
- Low-Speed High Torque, High-Speed High Power
- Specially Optimized Base Design to Resist Vibration from Heavy Cutting
- All Full-Teeth Adopt Original Taiwan Brands, with High Precision, Low Wear and Low Noise
Technical Specifications
| Item |
Unit |
VMC-1066HD |
| System |
CNC System |
- |
FANUC |
| Rapid Speed |
mm/min |
24000/24000/16000 |
| Cutting Feed Speed |
mm/min |
1-10000 |
| 3-Axis Rated Power |
Kw |
3.0/3.0/3.0 [Note①] |
| 3-Axis Rated Torque |
N.m |
20.0/20.0/27.0 [Note①] |
| Worktable |
T-Slot Dimensions |
- |
5-18-105 |
| Worktable Dimensions |
mm |
1200*600 |
| Max Worktable Load |
Kg |
1200 |
| Travel |
3-Axis Travel |
mm |
1000*600*600 |
| Distance from Spindle Nose to Worktable |
mm |
120-720 |
| Spindle |
Spindle Power |
Kw |
11-15 (Wide Range) |
| Spindle Rated Torque |
N.m |
420(Low Speed Gear)/105(High Speed Gear) |
| Spindle Gear Ratio |
- |
1:4 / 1:1 |
| Max Spindle Speed |
rpm |
2500(1:4) / 8000(1:1) |
| Spindle Taper |
- |
BT50 |
| Transmission |
Screw Diameter/Pitch |
mm |
Φ40D12/Φ40D12/Φ40D12 |
| Linear Rail Brand/Type/Width |
- |
PMI Roller 45mm/Roller 45mm/Rectangular rail [Note②] |
| Number of Rails/Sliders |
Pcs |
2-6/2-4/Rectangular rail |
| Tool Magazine |
Tool Magazine Capacity |
Pcs |
24 [Note③] |
| BT/BBT Pull Stud Angle |
° |
45° |
| Max Tool Diameter |
mm |
Φ110(Full Magazine)/Φ210(Empty Adjacent Tool) |
| Max Tool Length/Weight |
mm/kg |
350/15 |
| Tool Change Time |
s |
2.2 |
| Partial Configuration |
Automatic Chip Removal |
- |
Rear Flushing |
| Automatic Lubrication System |
- |
Thin Oil Lubrication |
| Electrical Cabinet Cooling |
- |
Heat Exchanger |
| Accuracy |
Positioning Accuracy (Full Travel) |
mm |
0.008 |
| Repeat Positioning Accuracy (Full Travel) |
mm |
0.005 |
| Others |
Air Supply Flow/Pressure |
- |
Flow 150(L/min)/Pressure(6Bar) |
| Total Power |
Kw |
30 |
| Machine Weight |
Kg |
7500 |
| Machine Overall Dimensions (L*W*H) |
mm |
4100*2800*2800 |
Standard Configuration:
Mechanical manual tool magazine, chain-type chip removal, spindle oil cooler, water gun, air gun, spindle air curtain, spindle ring spray, centralized lubrication, air source treatment, oil-water separation, heat exchanger, nitrogen balance (for VMC-1066 and above models)
Optional Configuration:
Mitsubishi/Syntec system, hollow screw, electrical cabinet air conditioner, 4-axis, 5-axis, column heightening, tool internal cooling, fixtures, clamps
※ The product appearance and configuration are subject to improvement with technological development, but will not be lower than current technical requirements. No separate notification will be given; the specific details shall be based on the technical agreement at the time of purchase.
Note ①: The 3-axis power and torque are based on FANUC. For detailed information on Mitsubishi, Syntec and other systems, please consult the corresponding account manager.
Note ②: In case of stock shortage, equivalent specifications (such as HIWIN, Rexroth, THK) will be used as substitutes. No separate notification will be given.
Note ③: Optional 30-tool capacity for the tool magazine.
SHIPPING
Frequently Asked Questions
Q1: What is the brand and model number of the VMC-1066HD?
A1: The VMC-1066HL is branded as GUSS and the model number is VMC-1066HD.
Q2: Where is the VMC-1066HD manufactured?
A2: The VMC-1066HD is made in Jiangsu, China.
Q3: Does the VMC-1066HD have any certifications?
A3: Yes, the VMC-1066HD is CE certified.
Q4: What is the minimum order quantity for the VMC-1066HD?
A4: The minimum order quantity for the VMC-1066HD is 1 set.
Q5: What are the payment terms and delivery time for the VMC-1066HD?
A5: The payment terms are T/T (telegraphic transfer), and the delivery time is about a month.
